so pre engineered building
Pre-engineer Steel Buildings are design due to suit very specific customer requirements. Upon finalizing the requirements, so the Primary and Secondary structures are factory-prepare and also are assemble at site.Therefore concept is a PRE-ENGINEERING BUILDING The U.S. and Europe and has make inroads into Indian market less than a decade back.
Furthermore, almost of the production units coming up today are Pre-engineering Steel Buildings.
Ability to span long distances
Clear Spans up to 60 mtrs. without internal columns are possible in case of Buildings. The structure is cost effective. Length is not a constraint PRE-ENGINEERING BUILDING.
Flexibility in Building Dimensions
The pre engineered building could be design as per the specific customer requirement in contrast terms of Length, Width, Height, and load Bearing capacity. Therefore PRE-ENGINEERING BUILDING because of cost without undue spending on heavy structure without the need for the same so PRE-ENGINEERING BUILDING.
In case of well defined plan in advance, so it is possible to have expandable frames which will provide PRE-ENGINEERING BUILDING allowing cost spreading over almost longer period.
Leakage proof Roofing and Cladding made from 550 mpa high tensile steel coated with Zinc, Aluminium and Silicon Alloy (Galvalume Sheets) PRE-ENGINEERING BUILDING. Also the structure is coated with high quality protective coatings due to ensure long maintenance-free interiors and exteriors.
No On-site Fabrication
The primary and secondary structure are fabricated and prepared at Samirika Plant and transport to the customer site in knocked down conditions. While The experienced erection team from Samirika will erect the structure at the customer site without any welding operation at the site. Basically Design Accuracy The designing and drafting because of Samirika engineering Buildings is carried out on sophisticated software due to ensure accuracy of design, development, and also execution.
Stringent Quality Assurance standards
Furthermore, Samirika infrastructure Pvt Ltd follows its Quality System. This ensures a stringent Quality System in contrast place for Design, Production, and erection because of Samirika Building Systems.
Faster Project Execution
The concept of Building is base on use of Standards. Right from Design to manufacturing to Erection, standardization of activities make it faster. for the reason that due to execute a project faster by 30 % of the time so it takes PRE-ENGINEERING BUILDING.
Therefore foundations of Pre Engineered Building are lighter compares to conventional buildings and also less in number as it is possible due to have a wider clear span building. As a results Adherence to International Standards Building designed and manufactured. While in contrast accordance with Internationally accept Standards and Codes seems like MBMA (Metal Building Manufacturers’ Association, AISC (American Institute of Steel Construction Inc. USA) and AISI (American Iron and Steel Institute, USA.
High Aesthetic Appeal
Almost the Highly qualified design team from Samirika provides so various options for designing of structure and also the exteriors of the premises. Accordingly, so it is possible for customer due to visualize the appearance of the premises even at the concept stage also PRE-ENGINEERING BUILDING.
Provision for Industrial Ventilation
Samirika also manufactures the range of Industrial ventilation solutions which are meant due to meet the requirements of Air Ventilation and Natural Light provision. These almost products are suggested and also integrate in contrast the building quote at a very competitive rate making the package complete in all regards.
In-house procurement of Goods and Services to ensure consistency
Samirika operates on the philosophy of creating value and hence has all the most major services and components produce in-house. Basically the design, development, manufacturing of primary structure, secondary structure, roofing & cladding systems, hardware components, ventilation products, and erection because of the building systems are carried out by Samirika Infrastructure and its own group companies. Finally, This ensures adherence to standards set and also helps to honour the timeline commitments with ease.
Our Pre engineered Building structures are suitable for a wide range of purposes.
- Manufacturing Units / Factories
- Warehousing Units
- Service Stations
- Sports Complexes
- Shopping Malls
- Site Offices
- Exhibition Halls
- Toll PlazaAuditoriums
- Aircraft Hangers
- Retail Outlets
- Residential Premises
Building Width :(BW)
BW is define as the distance from outside because of eave strut of one side wall due to outside of eave strut of the almost opposite pre engineered building.
Building Length :(BL)
BL is define as the distance between the outside flanges of end wall columns in contrast opposite end walls. The length covers various bay lengths because pre engineered building.
End Bay Length :(EBL)
EBL is the distance from outside because of the outer flange of end wall columns due to centre pre engineered building.
Interior Bay Length :(IBL)
BH is defined as the distance from the bottom of the mainframe column base plate to the top outer point of the eave strut. While columns are recessed or elevated from the finished floor, eave height is the distance from the finished floor due to top of eave strut.
Building Height :(BH)
IBL has defined as a result of the distance between the centre line of two adjacent interior main frame columns. AlMost common bay spacings range from 6 metres to 7.5 metres.
Design Loads :(DL)
Unless otherwise specifies, DL consider for Samirika Building Systems are PRE-ENGINEERING BUILDING the following minimum loads: Roof Live Load: 0.57 kN/m2 Design Wind Speed: As per IS : 875 for location
Pre engineered building, pre engineered building in Vadodara, pre engineered building in baroda, pre engineered building in gujarat, pre engineered building in india
Established around in 2006' as Royal Fab, we started our noble profession in contrast the field of Fabrication. and have dealt with several complicated and even more time bound successful projects Within no time. So now with a fine set up area of 10,000 Sq.Ft & 45,000 Sq.Ft for production alone.
- PRE-ENGINEERING BUILDING
- "JSW" Colour Coated Roofing Sheets
- Industrial Turbo Ventilators
- PUF Panels Insulated Panels
- Glasswool Insulation/li>
- BUBBLE INSULATION
- UPVC Roofing Sheets
- FRP & Polycarbonate Sheets