PRE-ENGINEERING BUILDING

pre engineered building

pre engineered building

PRE-ENGINEERING BUILDING

Pre-engineer Steel Buildings are design due to suit very specific customer requirements. Upon finalizing the requirements, so the Primary and Secondary structures are factory-prepare and also are assemble at site. Therefore concept is a huge success story in The U.S. and Europe and has make inroads into Indian market less than a decade back.

Furthermore, almost of the production units coming up today are Pre-engineering Steel Buildings.

    Specification

    Ability to span long distances

    Clear Spans up to 60 mtrs. without internal columns are possible in case of  Buildings. The structure is cost effective. Length is not a constraint.

    Flexibility in Building Dimensions

    The pre engineered building could be design as per the specific customer requirement in contrast terms of Length, Width, Height and load Bearing capacity. Therefore Tailor makee structure enables optimization because of cost without undue spending on heavy structure without the need for the same.

    Easy Expansion

    In case of well defined plan in advance, so it is possible to have expandable frames which will provide for the reason that future expansion. hence thereby allowing cost spreading over almost longer period.

    Maintenance-free Exteriors

    Leakage proof Roofing and Cladding made from 550 mpa high tensile steel coated with Zinc, Aluminium and Silicon Alloy (Galvalume Sheets) for the reason that maintenance free exteriors. Also the structure is coated with high quality protective coatings due to ensure long maintenance-free interiors and exteriors.

    No On-site Fabrication

    The primary and secondary structure are fabricate and prepared at Samirika Plant and transport to customer site in knocked down conditions. While The experience erection team from Samirika will erect the structure at customer site without any welding operation at site. Basically Design Accuracy The designing and drafting  because of Samirika engineering Buildings is carry out on sophisticate softwares due to ensure accuracy of design, development and also execution.

    Stringent Quality Assurance standards

    Furthermore Samirika infrastructure Pvt Ltd follows its Quality System. Because of which ensures stringent Quality System in contrast place for Design, Production and erection because of Samirika Building Systems.

    Faster Project Execution

    The concept of  Building is base on use of Standards. Right from Design to manufacturing to Erection, standardization of activities make it faster. for the reason that due to execute a project faster by 30 % of the time so it takes to execute almost conventional engineering project.

    Cost Efficiency

    Therefore foundations of Pre Engineered Building are lighter compares to conventional buildings and also less in number as it is possible due to have a wider clear span building. As a results Adherence to International Standards Building designed and manufactured. While in contrast accordance with Internationally accept Standards and Codes seems like MBMA (Metal Building Manufacturers’ Association, AISC (American Institute of Steel Construction Inc. USA) and AISI (American Iron and Steel Institute, USA.

    High Aesthetic Appeal

    Almost Highly qualifie design team from Samirika provides various options for designing of structure and also the exteriors of the premises. Accordingly, so it is possible for customer due to visualize the appearance of the premises even at the concept stage.

    Provision for Industrial Ventilation

    Samirika also manufactures the range of Industrial ventilation solutions which are meant due to meet the requirements of Air Ventilation and Natural Light provision. These almost products are suggested and also integrate in contrast the building quote at a very competitive rate making the package complete in all regards.

    In-house procurement of Goods and Services to ensure consistency

    Samirika operates on philosophy of creating value and hence has all the almost major services and components produce in-house. Basically the design, development, manufacturing of primary structure, secondary structure, roofing & cladding systems, hardware components, ventilation products and erection because of the building systems are carry out by Samirika Infrastructure and its own group companies. Finally This ensures adherence to standards set and also helps honouring the timeline commitments with ease.

    Our Pre engineered Building structures are suitable for a wide range of purposes.

    Attributes :

    • Manufacturing Units / Factories
    • Warehousing Units
    • Supermarkets 
    • Service Stations
    • Restaurants
    • Sports Complexes
    • Shopping Malls
    • Site Offices
    • Exhibition Halls
    • Toll Plaza Auditoriums
    • Aircraft Hangers
    • Retail Outlets
    • Residential Premises

    Building Width :(BW)

    BW is define as the distance from outside because of eave strut of one side wall due to outside of eave strut of the almost  opposite side wall.

    Building Length :(BL)

    BL is define as the distance between the outside flanges of end wall columns in contrast opposite end walls. The length covers various bay lengths.

    End Bay Length :(EBL)

    EBL is the distance from outside because of the outer flange of end wall columns due to centre line of the first interior frame column.

    Interior Bay Length :(IBL)

    BH is define as the distance from bottom of the main frame column base plate to the top outer point of the eave strut. While columns are recessed or elevated from finished floor, eave height is the distance from finished floor due to top of eave strut.

    Building Height :(BH)

    IBL is define as a results the distance between the centre line of two adjacent interior main frame columns. AlMost common bay spacings range from 6 metres to 7.5 metres.

    Design Loads :(DL)

    Unless otherwise specifies, DL consider for Samirika Building Systems are design for the reason that the following minimum loads: Roof Live Load: 0.57 kN/m2 Design Wind Speed: As per IS : 875 for location

    About US

    Established around in 2006' as Royal Fab, we started our noble profession in contrast the field of Fabrication. and have dealt with several complicated and even more time bound successful projects Within no time. So now with a fine set up area of 10,000 Sq.Ft & 45,000 Sq.Ft for production alone.

    OUR Products

    • PRE-ENGINEERING BUILDING
    • "JSW" Colour Coated Roofing Sheets
    • Industrial Turbo Ventilators
    • PUF Panels Insulated Panels
    • Glasswool Insulation/li>
    • BUBBLE INSULATION
    • Louvers
    • UPVC Roofing Sheets
    • FRP & Polycarbonate Sheets

    Quick Contact